wisenet device manager
Jessica Young
Updated on June 29, 2026
The Wisenet Device Manager is a custom program that helps the user to manage multiple IP network devices. This program discovers the Hanwha cameras on the network and easily allows the user to modify their IP addresses.
How do I add a device to Wisenet Device Manager?
In the tool box, click [Add Devices] button. 2. For device registration, select
What is Wisenet default IP?
` By factory default, the IP address will be assigned from the DHCP server automatically. If there is no DHCP server available, the IP address will be set to 192.168. 1.100. To change the IP address, use the Device Manager.
How do I set up Wisenet?
(1) Install the cameras on the walls and connect the power adapters to each camera. (2) Plug in the NVR power adapter and connect the NVR to your Wi-Fi router. (3) When the NVR is powered on, it will automatically start the pairing process with the cameras.
How do I reset my Wisenet camera?
Here’s the process to reset the camera:
Remove the dome to locate the reset button.Press and hold the reset button for 5 to 20 seconds.Wait until the LED turns off or you for a click sound.Release the button.
How do I register my device on Wisenet?
authorization to register the product. 2. Open a QR code scanner app on your mobile device. Point the phone’s camera at scan the QR code located on top of the device, and the QR code will automatically be recognized.
What is the default password for Wisenet DVR?
What is the default Password for Wisenet DVR? The default password for Wisenet DVR is “password”.
How do I reset my Wisenet admin password?
To Change your Password
On the Top Menu Bar click My Account.In the My Account Details section, click Change My Password. Enter your old password. Enter your new password. Enter your new password again.Click Change.
What is Wisenet admin password?
❖ The initial administrator ID is “admin” and the password should be set when logging in for the first time.
How do I reset my Wisenet DVR to factory settings?
To reset your Wisenet DVR to factory settings, you must first disconnect it from the power supply. Next, hold down the reset button on the back of the unit for about 10 seconds. After releasing the button, reconnect the power supply and wait for the unit to start up. The DVR will now be in factory default mode.
How do I access Wisenet DVR?
Run Internet Explorer, and enter the
Can’t connect to network Wisenet?
When the Wisenet Device Manager is not working properly, usually the problem is related to the network connection and most of the time you just need to turn the WiFi off and the software starts findind the devices. It’s also recommended to update the software to the last version.
Why can’t I see my security cameras on my phone?
And here are some common troubleshooting tips if you are unable to view cameras on connected app: Check the security camera connection and power. Make sure the network connection is stable by testing with other network devices. Reboot the security camera to fix issues.
Why is one of my security cameras not working?
This one is a golden rule when it comes to troubleshooting in IT. Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again.
How do I connect to WiseView?
After installation, open WiseView and select “Device”. Then click [ ] to add new device. Scan QR code under Information page. Then input client port, user name and password, and then click Save to log into the DVR.
How can I see my Samsung security camera on my phone?
How to Connect Your Security Camera(s) to Your Phone
Install our security camera mobile app on your device.Launch the surveillance app and add your security camera(s)Click the security camera(s) linked to your cell phone and enjoy live viewing.
