types of door handles

A door handle or doorknob is a handle used to open or close a door. Door handles can be found on all types of doors including exterior doors of residential and commercial buildings, internal doors, cupboard doors and vehicle doors.

What is a door handle that doesn’t turn called?

Dummy knobs do not turn. They don’t have locks, axles or latches. Dummy knobs are fake, fixed knobs used to open and close a door that doesn’t have a traditional latch. Available in common designs including handlesets and levers, dummy knobs also are used to dress up inactive doors.

What are the different types of hardware used in door?

Door Hardware 101. When shopping for door hardware, here’s some basic information you need to know. Electronic Door Locks. Electronic locks provide security and convenience. Keyed Door Knobs. Keyed Door Levers. Keyed Deadbolts. Keyed Handlesets. Other Door Hardware. Door Hardware Finishes.

What is the bar called between door handles?

A spindle is a length of square rod or bar, made from metal, usually steel, which connects two Door Handles or Door Knobs together on either side of a door. The spindle locates into the square holes found at the back of a set of door handles or door knobs.

What is dummy door lever?

*To give a longer and more technical explanation: A ‘Dummy Handle’ is one handle or a pair of handles with no latching or locking function that are also a non-turning door lever or door knob. In other words Dummy Handles & Knobs do not turn to open but rather are used to push or pull a door open or shut.

What is a privacy door handle?

Privacy door knobs have a twist or button lock that works from only one side. Some privacy door knobs with button locks have a pin hole on the outside knob and a generic key that opens the lock.

What is the difference between passage and privacy door knobs?

Privacy knobs have a locking system but do not require keys. If you want to unlock the door, you can use a privacy emergency key instead. For passage knobs, you cannot lock them. The knob is purely for easy access to another room.

How do I know what door handle to buy?

Measure the bore hole.

You’ll need to know the bore hole’s diameter to get the right sized knob. Measure across the circular hole at its widest point, i.e. start at the bottom of the hole and pull the tape until you hit the top of the hole. There’s your diameter.

Are all door knobs the same?

There are two main categories of door knobs: those made for doors inside a house, and those made for doors on the outside of a house. Within each category, there are a number of subtypes of knobs to consider as well.

Do all door knobs fit all doors?

To have the door function properly, you will have to make sure that the door knob you buy is the correct size for your door. The standard size for a door knob diameter is either 2 3/8 inches or 2 3/4 inches and these knobs will usually fit doors that are anywhere between 1 3/8 inches to 1 3/4 inches thick.

What are round door handles called?

Flush pull handles

Flush handles are most commonly used on sliding doors and are fitted into the door itself to create a flush finish, allowing doors to slide into the cavity without any obstruction. They come in a range of styles and sizes, from small finger pulls, to rectangles, squares and circular designs.

What is a split spindle handle?

Split spindle locking is visually the same as the lever handle locks, with a lever handle inside and out, the difference being the handles work independently of each other. PROS – If you close the door from inside it locks on the latch, so no one can enter.

What do grub screws do?

Well, the grub screw is generally used to secure an item against another item, without the use of a nut. This is important, because the ability to secure without a nut makes the grub screw very versatile, and means that a grub screw can be used in applications that require a very small and unobtrusive fixing.

What is a lever handle?

A lever handle is one of the most popular types of door hardware for residential/ commercial purposes . As opposed to door knobs, a door lever handle is a straight or sometimes curved handle. Its shape often provides flexibility to open the door. Lever Handles. Smart Products.

What does screw on rose mean?

This is a circular plate on which the handle or knob are mounted. A concealed rose simply means that the screws and holes used to fix the rose to the door are hidden by a cover. SASH LOCK: A mortice lock containing both a latch (operated by door handles) and a bolt (operated by a key).

What is a bolt through door handle?

Bolt-through fixings are a type of fitting that are used in conjunction with wood screws to strengthen the fitting of internal handles to your door.