shadow box fence panels

Shadowbox fences are known for withstanding strong winds and storms. Because they are not solid fences, this allows wind to pass through the boards, rather than hitting against them and knocking the fence over.

How many pickets do you need for a shadow box?

Shadow Box style consists of 17 to 21 Dog-ear and 13 Square Top pickets per 6 ft. section (depending on the look you want). Board on Board is a full privacy fence with 17 to 21 Dog-ear and 13 Square Top pickets per 6 ft.

How much does it cost to paint a shadow box fence?

Cost to paint a shadow-box fence

Painting a shadow-box fence costs $4 to $14 per linear foot or $600 to $2,100 for 150′. The shadow-box or board-on-board design creates 50% more painting surface area. Using an electric airless paint sprayer and a brush is the most efficient way to paint a shadow-box fence.

What is a board on board fence?

What is Board on Board Fence? Board on board fencing is constructed with an overlapping pattern of vertical pickets where every other board is attached to the opposite side of the fence rails, creating a gap in the fence. Board on Board Fencing – Sturdy and Secure.

What do you put in a shadow box frame?

What to Put in Shadow Boxes
paper flowers, paper butterflies or pressed flowers. memorabilia such as photos, concert tickets, wedding invitations, birth announcements, sports tickets, theater tickets.

Can you see through a shadow box fence?

Pets and Children Can Peer Through

Head-on, shadowbox fences are just as opaque as a standard privacy fence. However, if you’re up close, you can peer through the spaces to the other side.

Is shadowbox the same as board on board?

Shadow Box Fence vs Board on Board

Shadow box fences will be mistakenly referred to as board on board fences. A board on board fence has overlapping pickets that are attached to the same side of the fence. Unlike a shadow box fence there will be no gaps.

Are shadow box fences better?

Some fences lend themselves better to yards with a grade to them than others. The design of a shadowbox fence also it to easily — and attractively — follow the natural grade of your yard. Not only does this make the fence more stable, but it also improves the way your home looks.

How do I figure pickets for a shadow box fence?

Standard Gog Ear Fence = Multiply Length by 2.2.Shadow Box Fence = Multiply Length by 2.5.Board on Board = Multiply Length by 2.5.

How do you calculate fence pickets for shadow box fence?

To calculate pickets, decide the width and spacing of your pickets. Add the width and the spacing together to get the combined width. Change the length of your fence to inches to match the picket measurements. Divide the fence length by the total picket width to get the number of pickets needed.

What is the spacing between pickets on a shadow box fence?

Bullseye Fence Shadowbox privacy fences are constructed with full 6″ pickets based on 3″ spacing. This creates approximately a 1-1/2″ overlap as the pickets alternate on each side of the 2×4 stringer.

Is it better to paint or stain a fence?

Most of the time, staining is better than painting a fence. It’s true that stain eventually fades and must be reapplied, but not for several years. Also, because stain doesn’t peel or crack, it requires less preparation than repainting. Simply power wash the fence to produce a clean, prepped surface for staining.

Do you stain both sides of a fence?

Your fence you are required to maintain it. Around here it has to be fully on your property by a few inches unless the neighbor gives permission. You are also supposed to put the better side out. Unless they have gone in on this fence with you, you should stain both sides.

How many gallons of stain do I need for a fence?

For a small fence, up to 175 square feet, you will only need one gallon of stain, in any transparency. If your fence is larger, up to 550 square feet, you will need to buy 2 gallons of stain. For very large fences, up to 700 square feet, you will need 3 to 4 gallons of stain to complete the project.