8 foot picnic table plans

These 8 foot picnic table plans are ideal for large families or groups. It can seat up to eight people (10, if you count a person sitting at each end).

How wide is an 8 foot picnic table?

A classic rectangular picnic table usually has a width range from 28 to 30 inches and 6 or 8 feet long.

What is the best wood for making a picnic table?

Softwood species like Cedar, Redwood and Douglas fir are all good options that are both weather-resistant and available at most lumber yards. These are the best woods for picnic tables because they are lightweight and extremely tough.

What’s the standard size of a picnic table?

Picnic tables come in a variety of shapes and sizes—here a wooden rectangular picnic table designed for 4-6 people. Rectangular picnic tables are commonly dimensioned at 72” (183 cm) in width, 58.75” (149 cm) in depth, an overall table height of 30.5” (78 cm), and a bench height at 17” (43 cm).

How much should a picnic table overhang?

Be sure to leave a ¼” gape between them. (Hint: Use a pencil to ensure a ¼” gap when attaching the seats with deck screws). Attach tabletop boards and center support: (a) Lay the two (2) 2x6x72″ tabletop boards on either side of the table so they overhang the A-Frames by 6″.

How many people can a 72 inch picnic table seat?

A 60” to 72” long rectangular table can seat up to 6 adults. An 84” to 96” long rectangular table can seat up to 8 adults. A 108” to 120” long rectangular table can seat up to 10 adults.

How many people does an 8 foot bench?

The benches are a functional alternative for ceremony and farm table seating. Made of white pine and comfortably seat up to 6 guests on their 8 ft. frame.

How much wood do I need to build a picnic table?

How many pieces of wood do I need? You’ll need 14 6′ 2x6s. You can have 7 12′ 2x6s cut in half at the store. Then you will need 2 8ft 2x4s to make the braces and your cuts for underneath the table.

How much room do you need around a picnic table?

This general rule is to add 3 feet (36 inches) to each side of a table for general functionality with chairs and walkways.

Do picnic tables need to be pressure treated?

So, yes, pressure treated wood is safe to use for your outdoor furniture, including picnic tables and chairs, benches, and so forth. We recommend using ACQ (alkaline copper quaternary) treated wood as it’s been found to be the safest.

What angle are picnic table legs?

Draw a 60-degree angle at each end of the legs using a pencil and combination square, then cut with a circular saw.

Is Pine good for picnic table?

A popular choice for building picnic tables is pine or other softwoods. Softwoods are abundant and inexpensive, but they’re not great choices for an outdoor picnic table — they don’t tend to weather very well and don’t resist spills.